NOTES - CONTINUED:
(3) Add oil thru fill tube until level is visible in sight glass.
(4) Install vent plug. Install cover on fill tube.
Every 1000 hours, drain fluid and refill. Replace drain plug copper washers each time drain plug is removed.
17. BOOM SUPPORT LOCKING PINS. Every 200 hours, retract locking pins (TM 10-3930-675-10). Cover pins
with a thin coat of GAA, then extend pins and lock pins into extended position.
By Order of the Secretary of the Army:
ERIC K. SHINSEKI
General, United States Army
Chief of Staff
DISTRIBUTION: To be distributed in accordance with the initial distribution requirements for IDN: 256671
Card 20 of 20