PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
NOT FULLY MISSION
a. Verify that backup alarm functions a. Backup alarm does not
when transmission is placed in R
b. Check operation of horn.
b. Horn does not function.
Check operation of lights.
Any lights do not function, if
required for mission.
Move all control levers though each Mast does not respond to con-
position and observe mast movement. trol lever movements.
Ensure movement is smooth without
Release parking brake and drive Service brakes do not stop
machine slowly forward. Apply ser- machine.
vices brakes to ensure correct func-
Watch for evidence of fluid leakage.
Class III oil, coolant, or
hydraulic oil leaks are evi-
dent. Any fuel leak is evident.
Operate windshield wipers and washer
to verify correct operation.
Pedal binds or does not oper-
Check accelerator pedal and left and
right brake pedals for binding and
Check service brakes for pulling, Brakes pull, grab, or do not
grabbing, or reduced braking capacity. operate properly.
Notify Organizational Maintenance of
Check for smooth, controlled steering Steering is erratic.
without pulling or drifting. Notify
Organizational Maintenance of any
With warm oil and engine running,
0.1 Hours Hydraulic
ensure oil level in sight gage is above
ADD COLD mark in sight gage. Add
level is low.
Check all control levers for proper Mast does not respond to con-
operation. Ensure mast movement is trol lever movements.
smooth without binding.