TM 10-3930-641-20
Section II. SERVICE UPON RECEIPT
INSPECTING AND SERVICING PRESERVED VEHICLES
Do the following if the vehicle you receive has been stored:
Remove any tape or seals installed to protect openings.
1.
Remove the covering from over the windshield, windows, rear view mirrors, and lights.
2.
Remove the covering from the operator's seat.
3.
Remove the plastic covering from the instrument panel and steering column.
4.
Fill the fuel tank. Refer to TM 10-3930-641-10.
5.
Check tire pressure and inflate to the right pressure. See page 2-397.
6.
Check coolant in the radiator. The radiator is filled with antifreeze and water. Drain coolant and refill. See page 2-214.
7.
8.
Check for damage.
9.
10. Clean all exterior surfaces. Touch up paint scratches.
11. Do the before operation (B) preventive maintenance checks and services. Refer to TM 10-3930-641-10.
12. Do the lubrication specified in LO 10-3930-641-12.
14. Make sure the vehicle is ready for operation. Then remove all warning tags.