ELECTRICAL SYSTEMS TROUBLESHOOTING (CONT)
(Sheet 2 of 2)
PROBLEM NO. 15 (CONT)
NOTE A: After replacement, turn POWER switch to ON to ensure problem is solved.
QUESTION OR INSTRUCTION
Disconnect DK G/W wire at hydraulic level switch on
hydraulic tank. Prevent wire terminal from touching ground.
Does indicator light remain ON?
Turn POWER switch to OFF. Remove hydraulic oil level
Install correctly or repair/replace float, install switch
connect DK G/W wire and turn POWER switch to ON Does
indicator light remain ON?
Replace hydraulic oil level switch. POWER switch OFF.
Test for short in DK G/W wire from switch to indicator lamp
socket. See WIRE and HARNESS TESTING.