TM 10-3930-641-20
(Sheet 2 of 2)
VALVE COVERS REMOVAL/INSTALLATION (CONT)
ACTION
LOCATION/ITEM
REMARKS
REMOVAL
1. Clamps (1) and (2) on breather tube
connections.
breather service.
NOTE
Step No. 1 is not necessary for right side.
Remove.
2. Capscrews (3)
Remove.
3. Valve cover (5)
Remove four clips (7).
4. Breather tubes (6)
Remove and discard. Clean gasket mating
surface with cleaning solvent.
5. Gasket (4)
INSTALLATION
Install.
1. Gasket (new)
Place in position.
2. Valve cover (5)
a. Position tubes on engine.
3. Breather tubes (6)
b. Install clips (7).
4. Capscrews (3)
Torque in sequence to 13-23 lb. ft.
(18-31 Nm).
Install and tighten.
5. Clamps (1) and (2)
End
2-166