TM 10-3930-641-20
(Sheet 2 of 3)
SERVICE BRAKE CONTROL LINKAGE ADJUSTMENT (CONT)
REMARKS
LOCATION/ITENl
ACTION
Distance A should be 4.25 m. (108.0 mm).
a.
Check distance A.
location)
b. If distance A is incorrect, adjust rod length.
Remove cotter pin (1) from rod end pin (2).
Remove rod end pin (2).
Loosen nut (3).
Adjust rod length by twisting rod end (4)
in or out on rod (5).
Replace rod end pin (2) and cotter pin (1).
Recheck distance A.
Go on to Sheet 3
2-367