TM 10-3930-641-20
(Sheet 3 of 3)
UPPER DRIVE SHAFT REMOVAL/INSTALLATION (CONT)
ACTION
REMARKS
LOCATION/ITEM
NOTE
Use jack to support shaft.
Lift into place between torque converter and
1. Shaft with spiders
input transfer gear case.
Install. Tighten to a torque of 90 to 110 lb. ft.
2. Four capscrews, nuts and washers
(122 to 149 N m).
(1) at transfer gearcase end
Install. Tighten to a torque of 90 to 110 lb. ft.
3. Four capscrews, nuts and washers
(122 to 149 N m).
(2) at torque converter end
End
2-379