TIRE REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 7)
Block both sides of front and rear tires that are
not being serviced.
If not parked on concrete, place hardwood blocks
Raise off ground using hydraulic jack under
axle housing near tire being serviced.
Place under axle housing. Lower hydrauiic
4. Valve stem cap (7)
Remove slowly using valve stem core
5. Valve stem core (6)
All air must be exhausted from tire. Check the
valve stem by running a piece of wire through
it to make sure it is not plugged.
Go on to Sheet 3