TM 10-3930-641-20
(Sheet 2 of 2)
SEAT REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
Remove eight capscrews from seat platform.
1. Hex head capscrews (1)
Place on its side.
2. Seat, plate attached (2)
a.
b. Remove from cab to vehicle platform
outside.
Lower seat to the ground using hoist.
c.
Remove four hex head capscrews and lock-
3. Plate (2)
washers.
INSTALLATION
Install plate to bottom of seat with four cap-
1. Plate (3)
Raise up to outside vehicle platform.
2. Seat, plate attached
a.
b. Place seat on its side. Move into cab and
arrange seat upright.
Aline eight holes.
c.
d. Install eight hex head capscrews (1).
End
2-461