TRANSMISSION TROUBLE SHOOTING
TEST OR INSPECTION
1. TRANSMISSION ENGAGES, BUT ENGINE STALLS AND VEHICLE DOESN'T MOVE
Step 1. Inspect output transfer gears for damage.
Repair as necessary. (See page 4-138.)
Step 2. Inspect differentials for damage
Repair as necessary. (See page 4-271.)
Step 3. Inspect final drives for damage.
Repair as necessary. (See page 4-254.)
Step 4. Inspect transmission.
Check for damaged parts.
Repair as necessary. (See page 4-68.)
b. Determine if more than two clutches engage when a direction and speed are selected.
Power is transmitted through the transmission by engaging two clutches in combination, using the direction selection
When the operator uses the selection lever, first a speed clutch engages, then a direction clutch engages.