TM 10-3930-641-34-1
STARTING MOTOR SPECIFICATIONS
(Sheet 1 of 1)
24V Delco Remy Number 1109775
Rotation is clockwise when seen from drive end.
Minimum speed with no load
5500 rpm
Maximum speed with no load
7500 rpm
Current consumption (draw) at no load:
95 A
120 A
Clearance between pinion and housing
(pinion clearance)
36 in. (9.14 mm)
(1)
Tension of brush spring
80 oz. (2.270 kg)
(2)
Torque for screws that hold nose housing
to lever housing
13 to 17 lb. ft. (18 to 23 N-m)
(3) Torque for terminal nuts
20 to 25 lb. ft. (27 to 34 N-m)
STARTER SOLENOID
24V Delco Remy Number 1119832
Current consumption (draw):
Current at 20V
40 to 45.5 A
Current at 20 to 24V
40 to 54.6 A
(1) 4M1815 Spring for contact release:
Length under test force
.42 in. (10.7 mm)
Test force
8.5 to 9.5 lb. (3.9 to 4.3 kg)
Free length after test
.830 .015 in. (21.11 0.38 mm)
Outside diameter
.875 .010 in. (22.23 0.25 mm)
(2) 9M7609 Spring to return the clutch lever:
Length under test force
1.56 in. (39.6 mm)
Test force
14 .5 lb. (6.4 0.2 kg)
Free length after test
2.79 in. (70.9 mm)
Outside diameter
1.393 .015 in. (35.38 0.38 mm)
(3) Torque for terminal screws
16 to 30 lb. in. (1, 8 to 4.0 N-m)
TA098852
2-122