TM 10-3930-641-34-1
NEUTRALIZER VALVES SPECIFICATIONS
(Sheet 1 of 1)
(1) 1A8096 Spring for ball check valve:
Length under test force
.56 in. (14.3 mm)
Test force
4.0 t .3 lb. (17.8 + 1.3 N)
Free length after test
94 in. (23.8 mm)
Outside diameter
.32 in. (8.1 mm)
(2)
7B8194 Spring for stem:
Length under test force
1.16 in. (29.4 mm)
Test force
30.0 2.4 lb. (133.4 * 10.7 N)
Free length after test
2.17 in. (55.2 mm)
Outside diameter
91 in. (23.1 mm)
(3)
Approximate dimension between face of
striker (stud assembly)
and mounting bracket
1.56 in. (39.6 mm)
To check the striker adjustment:
(a) Put a .50 in. (12.7 mm) ball of putty (or similar material) on the
front frame stops.
(b) Raise the bucket about one foot and release the brakes.
(c) With the engine at high idle, steer rapidly into both stops.
(d) The thickness of the putty must then be .12 to .18 in. (3.0 to 4.6
mm) after the turns.
(e) If necessary, adjust the strikers until this dimension is correct.
CTA098864
2-134