TM 10-3930-641-34-1
ENGINE FRONT SUPPORT AND TRUNNION REMOVAL/INSTALLATION (CONT)
(Sheet 6 of 11)
LOCATION/ITEM
ACTION
REMARKS
28. Wiring harness (18)
a. Disconnect from main wiring harness.
b. Tag.
29. Capscrews at base of door assembly (19)
Remove from engine oil line and transmission
clips.
30. Door assembly (19)
a. Fasten hoist to door assembly.
b. Remove five capscrews (20).
c. Lift door assembly with hoist and set on
ground
31. Floor plates (21)
Remove from each side.
32.
Governor control and torque converter
Remove capscrews and nuts (25).
control cable clips on access door frame
(23)
Go on to Sheet 7
3-11