FUEL INJECTION PUMP HOUSING REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 6)
1. Fuel injection pump
Time the fuel pump (no. 1 cylinder top center
2. Fuel transfer pump (1)
a. Tag and disconnect lines (2).
b. Remove fuel line support bracket (3).
a. Tag and disconnect fuel lines (4) from
governor plate using 5P144 socket, fuel
b. Remove control cable (6) by removing
cotter pin and pin (5).
c. Remove control cable from bracket.
4. Fuel ratio control
Tag and disconnect air line (8).
Disconnect at connectors (7).
Go on to Sheet 3