FUEL RATIO CONTROL ADJUSTMENT (CONT)
(Sheet 3 of 4)
7. Governor control lever
a. Rapidly move in FUEL-ON direction.
b. Read measurement on dial indicator.
Read quickly and carefully because dial on in-
dicator will be at its peak for only a moment.
c. Dial indicator must read 0.070.
8. Valve (1)
a. Turn clockwise with cap (3) to increase
limited rack position.
b. Turn counterclockwise to decrease limited
9. Steps (5) and (6)
Repeat until proper measurement is achieved.
10. Cover (3)
a. Aline with pin (2) in valve and turn to aline
with nearest capscrew holes after final
b. Secure with capscrews.
Go on to Sheet 4