TM 10-3930-641-34-1
TURBOCHARGER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
7.
Thrust collar (16)
Remove, and take off thrust bearing (18).
8.
Retaining ring (20)
Remove.
9.
Retaining ring (20) and bearing (19)
Remove from center housing assembly (25).
10.
Piston ring (24)
Remove.
11.
Turbine wheel shroud (23)
Remove.
ASSEMBLY
NOTE
Use the grease pencil marks to line up the
parts correctly.
1.
Turbine wheel shroud (23)
Install on shaft and wheel assembly (22).
2.
Piston ring (24)
Insert in center housing assembly (25).
3.
Retaining ring (20)
Place in center housing assembly and insert
bearing (19) and the other retaining ring (20).
Go on to Sheet 5
3-115