EXHAUST MANIFOLD REMOVAL / INSTALLATION (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Locknuts and washers (1)
Remove eight (4 each side).
2.
Spacers (2)
Remove eight (4 each side).
3.
Remove.
3.1.
If one or more studs are broken, replace all
studs. Disassemble and clean manifold.
Apply antiseize compound (Item 20,
Appendix B) to slip joints and studs.
4.
Gasket (4)
Replace.
INSTALLATION
1.
Gasket (4)
Install.
2.
Install.
3.
Spacers(2)
Install.
4.
Locknuts and washers (1)
a. Install thumb tight.
b. Torque in sequence to 33 to 43 lb. ft.
(45 to 59 N-m).
TA501588 1
End
Change 1 3-132