RADIATOR AND SHROUD ASSEMBLY REMOVAL/INSTALLATION (CONT)
(Sheet 4 of 6)
6. Wiring harness (2)
Remove straps and fasten to radiator guard.
7. Tube assembly (6)
Disconnect from radiator.
8. Hose assemblies (7)
Disconnect from cooler b-pass valve.
Hydraulic oil will be trapped in tube assembly
(6). Have a container ready to catch oil.
9. Two 7/16-14 NC forge eyebolts.
Install in holes provided in radiator top tank.
10. Six bolts (5) that hold radiator guard to frame
11. Radiator and shroud assembly
Fasten hoist and remove.
Weight of radiator and guard is 1850 lb. (839
Always replace gaskets and hose assemblies.
Old ones will be too deformed for reuse.
1. New radiator and shroud assembly
Install two 7/16-14 NC eyebolts in holes provided in
radiator tank top and lift into position.
Go on to Sheet 5