TM 10-3930-641-34-1
STARTER MOTOR DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 7 of 13)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
1. Field coil (18), pole shoes (22) and
If the field coil or pole shoes were removed
screws.
be sure you install the insulator, gaskets
and bushing in the proper locations. Before
installing the pole shoes screws, coat them
with a thread sealer.
2. Switch
Remount the switch to the frame with the
four screws and washers.
3. Plunger assembly (4)
Assemble on the plunger (4) the flat washer
(5) plunger boot (6), washer (7), spring (15),
spring retainer (16), and last the snap ring
(17), which holds the assembly together.
8. Nut
13. Terminal stud
9. Lockwasher
insulating bushing
10. Washer
18. Field coil
11. Insulator washer
21. Insulator
12. Insulator washer
22. Pole shoe
13. Preformed packing
23. Pole shoe screw
Use a thread sealer on the screws.
4.
15. Helical compression spring
5.
Flat washer
16. Spring retainer
6.
Plunger boot
17. Snap ring..
7.
Washer
TA 099062
Go on to Sheet 8
3-193