TM 10-3930-641-34-1
STARTER MOTOR DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 10 of 13)
LOCATION/ITEM
ACTION
REMARKS
7. Frame (43) (commutator end)
If a new bushing (5) was installed it must be
reamed to 0.6860--0.6880 in. (17.4240-
2. Insulating bushing
17.4750 mm).
3. Terminal stud
insulator
Install the preformed packing (8), plugs (4)
4. Expansion plug
(9), insulating bushing (2), oiled wick (7) and
5. Bushing
the pipe plug (6).
6. Pipe plug
7. Wick
8. Brush plate assembly
Install the brush plate assembly (2) on the
8. Preformed packin
end frame (43), using a new preformed
9. Expansion plug
packing (20).
43. Frame
4. Hexagon nut
43. Frame assembly
5. Lockwasher
44. Brush holder
6. Flat washer
terminal stud
8. Flat washer
59. Brush plate assembly
9. Lockwasher
10. Panhead
machine screw
20. Preformed packing
TA 099065
Go on to Sheet 11
3-196