TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 10 of 14)
LOCATION/ITEM
ACTION
REMARKS
10.
Rocker shaft assembly (5)
a. Put in position on cylinder head.
b. Aline push rods with rocker arms.
11.
Rocker shaft bolts and washers (6)
a. Install finger tight.
b. Tighten each bolt in the sequence shown
at right to a torque of 200 + 20 lb. ft.
(271.2 + 27.1 N m).
c.
Tighten each in the same sequence to
330 + 15 lb. ft. (447.4 + 20.3 N m).
d. Again tighten each in that sequence to
330 + 15 lb. ft. (447.4 + 20.3 N-m).
TA099080
Go on to Sheet 11
3-226