TM 10-3930-641-34-1
SPACER PLATES REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
NOTE
Be sure spacer plate and machined surface
of cylinder block are clean and dry.
1.
Spacer plate gasket (1), O-ring seal (2) Put new gasket and seal into position over
the dowels on the cylinder block.
CAUTION
Do not use adhesive on the gasket.
2.
Spacer plate (3)
Install.
TA099090
Go on to Sheet 4
3-248