CAMSHAFT INSPECTION (CONT)
(Sheet 2 of 2)
a. Clean with solvent and stiff bristle brush
Check for cracks using dye penetrant,
magnetic field fluorescent, or other suitable
c. Support on U-blocks and use dial indicator to
measure runout. Runout should not exceed
0.002 in. (0.050 mm) at center bearing.
2. Camshaft bearing journals
a. Check for signs of uneven wear, scratches,
b. Check that diameter of bearing journals is
See Engine specifications, page 2-69.
3. Camshaft lobes
Check for pitting and uneven or excessive wear.