TM 10-3930-641-34-1
CRANKSHAFT REMOVAL/INSTALLATION (CONT)
(Sheet 9 of 10)
LOCATION/ITEM
ACTION
REMARKS
13. Main bearing cap bolts
a. Tighten bolts on tab end of each cap to a
torque of 190 10 lb. ft. (257.6
13.6 N m).
b. Tighten bolts on other end of each cap
to a torque of 190 + 10 lb. ft. (257.6 +
13.6 N m).
c. Scribe a mark across top surface of each
bolt head and cap.
d. Tighten the bolts opposite the tab end of
each cap until the marks are 1200 apart.
e. Tighten the bolts on the tab end of each
cap until the marks are 1200 apart.
TA099130
Go on to Sheet 10
3-329