TM 10-3930-641-34-1
CRANKSHAFT SEALS REPLACEMENT (CONT)
(Sheet 2 of 7)
LOCATION/ITEM
ACTION
REMARKS
FRONT SEAL
REMOVAL
1 Front seal (1)
Remove, using puller (2) as shown at right.
NOTE
Front wear sleeve must be replaced whenever
front seal is removed.
2 Front wear sleeve
a Install ring (from wear sleeve removal tool
kit) into seal bore.
b. Install distorted (from wear sleeve removal
tool kit) between ring and the wear sleeve.
c. Turn distorter until its edge makes a crease
in the wear sleeve. Do this in two or more
places until wear sleeve is loose.
d. Remove ring and wear sleeve.
TA099132
Go on to Sheet 3
3-332