FINDING TOP CENTER POSITION (CONT)
(Sheet 3 of 4)
Remove from timing hole location. Remove
two capscrews - one short and one long timing
Engine turning tool (9S9082)
Place in position to turn engine. Install long
a. Turn clockwise (when looking at flywheel)
about 30 degrees.
b. Turn counterclockwise until you can install
This removes play from timing gears.
the timing bolt into the flywheel
No. 1 piston is now at top center (TC).
Valves should be closed if No. 1 piston is on compres-
Valves for No. 1 cylinder
CYLINDER AND VALVE LOCATION
Go on to Sheet 4