TM 10-3930-641-34-2
TRANSMISSION DISASSEMBLY (CONT)
(Sheet 15 of 20)
LOCATION/ITEM
ACTION
REMARKS
49.
Piston (62)
Remove.
50.
Two seal rings (54) and (38)
Remove.
51.
Three disc assemblies (22) and two
Remove.
plates (23) of No. 2 clutch housing
52.
Input shaft assembly (74)
a. Install a 1/2"-13NC forged eyebolt in the
end of shaft assembly.
b. Attach hoist as shown.
c.
Remove with carrier (18) and ring gear
(24) attached.
NOTE
Unit weighs 160 lb. (72.57 Kg).
53.
Tooling (sleeve, capscrew, retainer)
Remove.
installed in Step 5.
TA099288
Go on to Sheet 16
4-82