TRANSMISSION ASSEMBLY (CONT)
(Sheet 10 of 31)
25. Pins (shown at right)
Install each until it is flush with outside
surface of carrier.
Lock ring (11)
Install on planet carrier (16).
Planet carrier (16)
a. Attach hoist as shown.
b. Lift and position on ring gear (1).
Using two screwdrivers, slightly compress
lock ring (11) as shown.
d. Slide carrier into ring gear until lock ring
(11) engages with groove in gear.
Install on shaft (76).
Be sure notch in bearing aligns with pin (75)
in shaft assembly.
Go on to Sheet 11