TRANSMISSION ASSEMBLY (CONT)
(Sheet 17 0f 31)
Snap ring (46)
Install to secure carrier/ring groove assembly.
Six reaction pins (55)
Three disc assemblies (52) and two
a. Lubricate with clean oil.
clutch plates (23)
b. Install as shown, beginning with a disc
Two seal rings (38) and (54)
a. Install on piston (53) of No. 3 clutch
piston housing (58).
Be sure oil groove and sealing edge are
toward inside of housing.
b. Lubricate with clean hydraulic fluid.
Go on to Sheet 18