TM 10-3930-641-34-2
TRANSMISSION ASSEMBLY (CONT)
(SHEET 20 OF 31)
LOCATION/ITEM
ACTION
REMARKS
69.
Two seal ring (110) and (111)
a. Install on piston (109) No. 5 clutch
piston housing (115).
NOTE
Be sure oil grooves and sealing edges are
toward inside of housing (106).
b. Lubricate with clean oil.
70.
Three disc springs (114)
a. Install first spring with outside diameter
of spring in contact with housing assembly.
b. Install next two springs with outside
diameter of springs in contact with each
other.
71. Retainer plate (113)
Place in position on housing assembly over
the three springs.
TA099312
Go on to Sheet 21
4-107