TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (INPUT) DISASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
1.
Input transfer gear assembly (1)
Put on wood blocks.
2.
Yoke assembly (2)
Remove.
3.
Remove.
(30) from bearing cage (4)
4.
Two capscrews (20)
a. Install in threaded holes in the bearing
cage (4), use as forcing screws to loosen
bearing cage (4).
b. Tighten evenly until cage (4) is loose.
5.
Cage (4) and shims (5)
Remove.
6.
Preformed packing (6)
Discard.
7.
Seal (3)
Remove.
4-125