TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (INPUT) ASSEMBLY (CONT)
(Sheet 7 of 7)
LOCATION/ITEM
ACTION
REMARKS
12.
Lip type seal (3)Using suitable driver, install in cage as shown.
NOTE
Back of seal must be flush with counterbore
in cage and lip of seal must point away from
cage surface.
13.
Preformed packing (6)
Install on cage (4).
14.
Lip type seal (3)
Coat with clean oil.
15.
Cage (4)
Install and secure with capscrews (20) and
16. Yoke assembly (2)
Install.
End
4-135