TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (OUTPUT) ASSEMBLY (CONT)
(Sheet 2 of 9)
LOCATION/ITEM
ACTION
REMARKS
1.
Tube assembly magnets (32) and
Clean thoroughly.
screen (30)
2.
Tube assembly (31) and screen
Install in housing (20).
(30)
3.
Preformed packing (23) and plate
Install on housing (20).
assembly (24)
4.
Bearing cup (69)
Lower temperature of cup and install in
bearing cage (19).
5.
Lip type seal (18)
a.
Using driver, install in bearing cage (19).
NOTE
Install so back of bearing contacts counter-
bore and bearing lip points toward inside of
cage.
b.
Coat lip of seal with fresh GAA grease.
TA099345
Go on to Sheet 3
4-147