TM 10-3930-641-34-2
TRANSMISSION HYDRAULIC CONTROLS REMOVAL/INSTALLATION (CONT)
(Sheet 5 of 7
LOCATION/ITEM
ACTION
REMARKS
9. Plug (30), spring (28) and sleeve
Remove from transmission case.
(27), preformed packing (26) and
(29)
NOTE
To remove sleeve (27) it may be necessary to
thread in a 3/8 inch eyebolt.
10. Preformed packings (26) and (29)
Replace if necessary.
11. Four hydraulic control capscrews
Remove.
(24), and washer (25)
12. Lifting bracket (A)
Attach to hydraulic controls as shown.
13. Hydraulic controls
Attach hoist as shown and remove from case,
Hydraulic controls are 88 lb. (40 Kg).
TA099357
Go on to Sheet 6
4-161