TRANSMISSION HYDRAULIC CONTROLS REMOVAL/INSTALLATION (CONT)
(Sheet 6 of 7
1. Lifting bracket (A) and hoist
Attach to transmission hydraulic control as
2. Transmission hydraulic controls
a. Position in transmission.
b. Secure with capscrews. Tighten to a
torque of 32-38 lb. ft. (44-52 N-m).
3. Preformed packing (26) and (29)
Install on sleeve (27). Lubricate with clean oil.
4. Sleeve (27), spring (28), and plug
Install in transmission case and transmission
Go on to Sheet 7