TRANSMISSION OIL PUMP REMOVAL (CONT)
(Sheet 3 of 5)
a. Remove six capscrews that hold trans-
mission and pilot systems oil filter bases
b. Do not disconnect hydraulic lines from
Put filters and bases on floor plates.
6. Air cleaner housing
Remove four capscrews (5) that secure
housing to filter base frame.
Air cleaner indicator sending
Disconnect wire (6) from unit.
Filter group (8)
a. Remove four capscrews that hold filter
group in position.
b. Remove three capscrews that hold heat
shield to filter group.
c. Attach hoist to group (8) and remove it.
Weight of group is 100 lb. (45.4 Kg).
Go on to Sheet 4