TM 10-3930-641-34-2
TRANSMISSION OIL PUMP DISASSEMBLY (CONT)
(Sheet 3 of 5
LOCATION/ITEM
ACTION
REMARKS
NOTE
Be sure all parts are clean and coated with
SAE 30 oil before assembly.
1.
a. Install in oil pump manifold (21) until
machined surface of manifold.
NOTE
Bearing seams should be 15 - 450 from
centerline through bearing bores and should
face toward oil outlet port in manifold.
b. Check that bearing bore is within
See Specifications, page 2-69.
specifications.
2.
Preformed packing (19)
Install in oil pump manifold (21).
3.
Body assembly (4)
Put in position on manifold assembly (21).
4.
Idler gear assembly (20) and drive
a. Install in manifold and body.
gear assembly (3)
b.
Check gear clearance.
See Specifications, page 2-69.
Go on to Sheet 3
4-193