FINAL DRIVE PLANET CARRIERS REMOVAL/INSTALLATION(CONT)
(Sheet 2 of 5)
1. Bracket (A)
Attach to carrier (4).
2. Thirty-four nuts (1) and washers
Attach to bracket (A) on carrier (4).
4. Drain plug (2)
5. Three 1/2-13 NC forcing
Install in carrier. Tighten evenly, one turn
at a time, until carrier is loose. After carrier
is loose, remove forcing screws.
Install gear end of axle in carrier. The axle
will help hold the carrier in position.
7. Carrier (4)
Weight of carrier is 295 lb. (133.8 Kg).
Go on to Sheet 3