REAR DIFFERENTIAL, BEVEL GEAR AND FRONT SUPPORT REMOVAL (CONT)
(Sheet 4 of 4)
14. Twenty-four capscrews that secure
15. Rear differential and bevel gear (10)
a. Attach transmission floor jack as
b. Install two 3/4-10 NC forcing screws
c. Tighten forcing screws evenly until
differential comes loose from axle housing.
d. Pull differential as far as possible from
axle housing and turn it clockwise.
e. Raise the vehicle until the wheels are
about 9 in. (228.6 mm) off the ground.
Differential and bevel gear weigh 915 lb.
f. Remove differential and bevel gear from