TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR DISASSEMBLY (CONT)
(Sheet 2 of 11)
LOCATION/ITEM
ACTION
REMARKS
1. Two bearing cups (20) and (25)
Install in housing (22).
2. Inner bearing cone (19)
Heat cone to maximum of 2750F (1350C)
and install on pinion shaft (18).
CAUTION
Be sure cone is against shoulder of shaft.
3. Housing (22)
Install over pinion shaft (18).
4. Outer bearing cone (24)
Heat to maximum of 2750F (1350C) and
install on pinion shaft.
5. Washer (26), lock (40), and nut (39)
Install as shown.
6. Pinion shaft (18)
Adjust end play.
See Differential and bevel gear adjustment, page 4-289.
TA099418
Go on to Sheet 3
4-279