TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR ASSEMBLY (CONT)
(Sheet 5 of 11)
LOCATION/ITEM
ACTION
REMARKS
7.
Guard (33), yoke (32), retainer (29),
preformed packing (30), capscrew
(28)
8.
Lock (40)
When end play is set, bend tab on lock (40)
into notch in nut (39).
9.
Guard (33), yoke (32), packing (30),
Remove.
retainer (29), capscrew (28)
10.
Lip type seal
Install in retainer using suitable seal driver.
NOTE
Install seal with lip toward inside of retainer.
Seal should just contact surface of counterbore
in retainer.
TA099421
Go on to Sheet 6
4-282