TM 10-3930-641-34-2
DRIVE SHAFTS DISASSEMBLY / ASSEMBLY (CONT)
(Sheet 5 of 15)
LOCATION/ITEM
ACTION
REMARKS
8.
Six capscrews (23) and washers (15)
Remove.
9.
Bearing cage retainer (22)
a. Remove from bearing cage.
b. Inspect for cracks, dents, and distortion.
c. Replace if necessary.
10.
Shims (21) and (20)
a. Inspect for damage.
b. Remove if necessary, discard.
c. Replace if damaged.
11.
Lip type seal (13)
Remove from retainer and discard.
12.
Bearing (18)
a. Remove from cage.
b. Inspect for cracks, nicks, distortion, and
rough turning action.
c. Replace if necessary.
13.
Preformed packing (19)
Remove from cage and discard.
Go on to Sheet 6
4-312