TM 10-3930-641-34-2
DRIVE SHAFTS DISASSEMBLY / ASSEMBLY (CONT)
(Sheet 6 of 15)
LOCATION/ITEM
ACTION
REMARKS
14.
Guard (1) and spacer (2)
a. Remove from shaft (use a soft faced
hammer if necessary).
b. Inspect for cracks, nicks, dents, dis-
tortion, etc.
c. Replace if necessary.
15.
Four capscrews (7) (on spider of
Remove.
front shaft)
16. Spider (5)
a. Remove from shaft.
b. Inspect spider for cracks, distortion,
sloppy bearing action, etc.
Replace if necessary.
NOTE
Spider must be replaced as unit.
WARNING
Shaft weighs 90 lbs. (40.8 Kg). Use jack.
TA099437
Go on to Sheet 7
4-313