TM 10-3930-641-34-2
BRAKE ACCUMULATOR REMOVAL/INSTALLATION (CONT)
(SHEET 4 of 4)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
1.
Hoist
Fasten to brake accumulator.
2.
Holes (10)
Position as shown.
3.
Brake accumulator
a. Lower into vehicle.
b. Move some hoses and lines as accumulator
is put into position.
4.
Two capscrews that secure
Install.
accumulator bottom
6.
Three capscrews that secure
a. Install.
accumulator at top
b. Remove hoist.
6.
Hydraulic line (4)
Connect to accumulator.
7.
Hydraulic line on steering and brake
Tighten.
pump
8.
Hydraulic line for rear brakes at
Tighten.
brake control valve manifold
9.
Clip that secures heater hose on
Install.
transmission
10.
Tube assembly (5)
Install.
11.
Two panels over left side of machine
Install.
12.
Accumulator
TA098915
End
5-8