TM 10-3930-641-34-2
ACCUMULATOR CHARGING VALUE REMOVAL/DISASSEMBLY/ASSEMBLY/INSTALLATION (CONT)
(Sheet 2 of 7)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
Brake control valve group
Remove.
2.
Tube assembly (2)
a. Disconnect from manifold on bottom of
accumulator charging valve.
b. Cap or plug openings.
3.
Tube assembly (1)
a. Disconnect at tee fitting.
b. Cap or plug openings.
4.
Three capscrews (3) that secure
Remove.
accumulator charging valve to plate
assembly
5. Accumulator charging valve (4)
Remove from plate assembly.
DISASSEMBLY
WARNING
Housing (5) is under tension from springs
behind it. Do not remove all housing cap-
screws at once.
1.
Capscrews (6)
a. Remove except for two.
b. Install longer capscrews or two 3/8-16
NC forcing screws with nuts in body.
Do not force screws too far into housing.
c.
Remove two remaining capscrews.
TA098917
Go on to Sheet 3
5-15