ACCUMULATOR CHARGING VALUE REMOVAL/DISASSEMBLY/ASSEMBLY/INSTALLATION (CONT)
(Sheet 7 of 7)
Install in housing (22).
Springs (24) and (26)
Slide into housing.
a. Position on valve body.
b. Install longer capscrews or two 3/8"-
16 NC forcing screws. Tighten until
original capscrews can be installed.
Secure with capscrews.
Accumulator charging valve (26)
a. Position on plate assembly.
b. Secure with three capscrews.
Tube assembly (27)
Connect to manifold on bottom of
accumulator charging valve.
Tube assembly from fitting on body
group of accumulator charging
valve to tee fitting
Brake control valve group