TM 10-3930-641-34-2
BRAKE CONTROL VALUE DISSAMBLY/ASSEMBLY (CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
6.
Lip type seal (18)
Install on retainer (19) with suitable driver.
NOTE
Lip of seal must face inside of retainer.
7.
Valve stem (21)
Install in retainer (19).
8.
Retainer (22)
Install on valve stem (21).
9.
Nut (23)
Install on valve stem and tighten to a torque
32-38 lb. ft. (44-52 N-m).
10.
Shims (24)
Install.
11
Packing (20)
Replace.
12.
Retainer (19),four capscrews (13),
Install on valve body.
and washers (14)
13.
(6 and 7)
Install on brake control valve.
See sheet 2 for art.
Go on to Sheet 7
5-36