ARTICULATED HITCH DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 7 of 16 )
You must disconnect shipping link at this time.
Front main frame and supports
Move away from rear frame using suitable
vehicle. Move supports and floor jack at same
Capscrews (15), bearing cap (8),
Remove from upper pivot joint.
lower bearing cap (12) and shim
Remove from upper and lower bearing caps.
Lower top center joint
Put hydraulic puller in position as shown. Both
sets of bearing cups and cones will be removed
at same time.
Bearing cups (21) and cones (20) on
Fasten hoist and remove.
Go on to Sheet 8