TM 10-3930-641-34-2
HYDRAULIC (STEERING AND BRAKE) PUMP REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 9)
LOCATION/ITEM
ACTION
REMARKS
4.
Hydraulic lines (3)
Tag and disconnect from oil filter base.
5.
Wire harness (4)
Disconnect from sending unit.
6.
Six capscrews (5)
Remove from filter bases.
NOTE
Do not disconnect hydraulic lines from the
bases. Place the filters and bases on the floor
plates.
7.
Wire (6)
Disconnect from sending unit.
8. Clamp (7)
Loosen.
6-54