TEE TEST PROCEDURE FOR STEERING SYSTEM (CONT)
(Sheet 20 of 24)
Turn to. right continuously.
Run at any rpm.
TESTS 20 AND 21
Tests 20 and 21 are the same except one is for
left turn and the other for right turn.
Manual load valve on flow meter
Open all the way.
Turn to the right (or left).
Run at 2000 rpm.
Manual load valve
Close slowly until you get 1000 psi (703 kgs/
Flow rate (gpm)
Record. Do this for both tests.
Go on to Sheet 21
Go on to Sheet 22